img
HOME
  • PRODUCT CENTER
  • ABOUT US
  • CONTACT US
  • Home > PRODUCT CENTER > Controllers >

    IN-CAB SWITCH

    1. The RKM In-Cab Switch is an excellent optional set-up for those serious off-roaders that do allot of winching. No need to plug in a hand-held remote to the control box; no need to run that long wire back to the driver’s seat; your winching is setup ready to go with just a push of the button located in your dash board (or any other convenient location you choose to install it at).
    2. Comes standard with an On\OFF switch.
    3. The LED lights let you know if you are winching OUT or IN. RED for OUT. GREEN for IN
    4. The LEDs in the In-Cab Switch also light up if your spotter is using the hand-held remote doing the winching for you. This lets you see inside the cab if the winch is pulling in or out.

    Can be used on any DC electric winch.

    You’ll need to run the wiring from the winch control box to your cab.
    You may also need to cut slots for the switches to fit.
    . Other installation may be required if not used on the RKM Low Profile Control Box.

    Accessories & related products

    Copyright © 2019 RKM.Rights Reserved
    img img
    PRODUCT CENTER ABOUT US CONTACT US
    Copyright © 2019 RKM.Rights Reserved
  • Contact Us
    Tel: +86 189 2643 5932 Trent
    Tel: +86 150 1256 3131 Stan
  • Email
    Email: Info@rkm.cc
    Email: Trent@rkm.cc
    Email: Stan@rkm.cc
  • Facebook
  • Twitter
  • Linkedin